Data Center HVAC Solutions
Cooling infrastructure for data centers — air & liquid.
Air distribution ductwork, liquid cooling piping, flexible cooling hoses, precision dampers, and copper line sets — manufactured to data center tolerances. Houston duct production is planned for December 2026.
Why data centers choose Airwise
Three capabilities that matter for mission-critical cooling infrastructure.
Confirm by model
UL certification has not been obtained. A new application is planned for November 2026. Ask for product-specific test reports before specifying components for a project.
Production planned
The 4,300 sqm Houston facility is expected to be ready by December 2026 for galvanized ducts, spiral ducts and custom elbow fittings. Ask us to confirm current availability.
Since 2000
Deep manufacturing expertise across the full HVAC component range. 6 production lines, self-developed equipment, and 60+ engineers and technicians. We have supplied commercial HVAC projects in 60+ countries.
HVAC solutions for every data center cooling architecture
Whether your facility uses raised-floor plenum supply, overhead ducted return, or hot/cold aisle containment — we manufacture the components.
Underfloor Air Distribution & Plenum Systems
Raised-floor data centers rely on pressurized underfloor plenums to deliver conditioned air to server racks. We manufacture perforated floor grilles, adjustable airflow tiles, supply air plenums, and damper-controlled floor registers that provide precise CFM delivery to each rack position. Available in galvanized steel with powder-coated or anodized finishes.
Browse grilles & diffusers →Hot Aisle / Cold Aisle Containment
Aisle containment is the most effective way to improve data center PUE (Power Usage Effectiveness). We fabricate custom ceiling return plenums, end-of-row blanking panels, overhead duct runs, and sealed return pathways that prevent hot and cold air mixing. Each project is engineered from your rack layout drawings for precise fit. Our galvanized steel construction with fire-rated finishes meets data center safety standards.
Browse plenums & air boxes →Precision Dampers & Airflow Control
Data centers require zone-level airflow control to match cooling delivery to heat load. We manufacture motorized volume control dampers (24V/240V), opposed-blade dampers (OBD), non-return dampers, and BMS-compatible actuators. Our motorized dampers integrate with building management systems for automated airflow balancing — critical for maintaining optimal server inlet temperatures across varying compute loads.
Browse dampers & controls →Spiral Duct & Metal Fittings
The backbone of any ducted data center cooling system. We supply spiral ducts, branch take-offs, reducers, elbows, starting collars, and custom transition fittings in galvanized steel. Houston production of galvanized ducts, spiral ducts and custom elbows is expected by December 2026.
Browse ducts & fittings →Ventilation, Louvers & Exhaust Systems
Data centers need controlled fresh air intake and reliable exhaust pathways. Our weather-proof louvers (full/half chevron), inline exhaust fans, roof cowls, and gravity-operated dampers handle ventilation for generator rooms, UPS rooms, battery storage areas, and economizer-mode free cooling systems. All louvers are engineered for weather resistance with tested water penetration ratings.
Browse ventilation & louvers →Copper Piping & Refrigerant Lines
Precision air conditioning (CRAC/CRAH units) in data centers require reliable refrigerant and chilled water piping. We supply ACR-grade copper tubing (hard-drawn and soft-drawn), pre-insulated pair coils, copper fittings (elbows, couplers, reducers), silver solder, and pipe insulation. Complete piping packages reduce procurement complexity for CRAC installation contractors.
Browse copper pipe & fittings →Liquid cooling piping for AI & high-density data centers
AI training clusters (NVIDIA GB200, AMD MI300X) generate 50-100 kW per rack — far beyond what air cooling can handle. The data center liquid cooling piping market is growing at 25-33% annually. Airwise supplies the piping infrastructure that connects cooling distribution units (CDUs) to server racks.
Flexible Cooling Hoses & Connectors
Stainless steel braided hoses (316/321 grade) and quick-disconnect connectors for CDU-to-rack liquid cooling loops. Available in sizes from ½" to 4" with rated pressures up to 300 PSI. Our flexible hoses accommodate thermal expansion, vibration isolation, and maintenance access — critical for hot-swappable server rack connections.
Expansion Joints & Vibration Isolators
Metal and rubber expansion joints, seismic loops, and pump isolators that absorb thermal movement and vibration in chilled water and coolant distribution systems. Data center cooling loops experience continuous thermal cycling — expansion joints prevent pipe stress, leaks, and equipment damage. Available in flanged, threaded, and grooved-end configurations.
Chilled Water Distribution Piping
Pre-insulated copper and stainless steel piping for chilled water loops that feed CRAH units and liquid cooling CDUs. Includes valves, strainers, pressure regulators, and flow measurement devices. Our copper line sets come pre-brazed and pressure-tested for leak-free installation — reducing on-site labor and commissioning time.
Custom Fabrication & Integration
Every data center has unique piping layouts. We work from mechanical drawings (AutoCAD / Revit) to scope custom components. Houston production of galvanized ducts, spiral ducts and custom elbow fittings is expected to be ready by December 2026; confirm availability and lead time for each project.
Houston production planned for December 2026.
Texas data center construction investment will reach $26 billion in 2026 — a 63% increase year-over-year. With 250+ projects underway (140 already in active construction), Texas is the largest data center market in the US.
Our Houston facility is being prepared for local production of galvanized ducts, spiral ducts and custom elbow fittings. Until startup, please confirm sourcing, availability and lead times for each project.
From edge to hyperscale
Full HVAC infrastructure packages for large-scale cloud and AI training facilities. Phased delivery aligned to construction schedule.
Flexible cooling components for multi-tenant environments. Hot/cold aisle containment, raised floor systems, and zone dampers.
Precision cooling for on-premise server rooms and private data centers. Compact plenum systems and CRAC piping packages.
Modular cooling components for distributed edge computing sites. Pre-configured ventilation and exhaust kits for rapid deployment.
Data Center HVAC Technical Resources
Engineering guides written by our team for data center mechanical contractors, MEP engineers, and facility managers.
Raised floor plenum sizing, hot/cold aisle containment, overhead duct routing, and ASHRAE airflow calculations.
Read guide →CRAC vs CRAH, in-row cooling, hot/cold aisle containment, and liquid cooling system design.
Read guide →Ductwork specifications, airflow calculations, and component sourcing for data center cooling.
Read guide →Underfloor plenum depth, perforated tile CFM, pressure uniformity, and cable management.
Read guide →Rack-level airflow management, blanking panel ROI, and containment optimization.
Read guide →CDU-to-rack piping, flexible hose specs, and material selection for direct-to-chip cooling.
Read guide →Frequently asked questions
What HVAC components does Airwise supply for data centers?▾
Airwise manufactures precision air distribution systems for data centers: underfloor plenum supply systems, perforated floor tiles and grilles, hot aisle / cold aisle containment ductwork, precision dampers and motorized volume control dampers, spiral duct systems for chilled water pipe insulation routes, and custom sheet metal fabrication for air handler connections. All products are manufactured to tight tolerances required for data center airflow management.
Do you have a manufacturing facility in the United States?▾
Airwise has a 4,300 sqm facility in Houston, Texas, alongside manufacturing in Dongyang, Zhejiang, China. Houston production of galvanized ducts, spiral ducts and custom elbow fittings is expected to be ready by December 2026. Confirm current production availability and lead times before planning a project.
What certifications does Airwise hold for data center HVAC?▾
Airwise has not obtained UL certification. Previous attempts did not pass, and a new application is planned for November 2026. CE, M1, RoHS and AWTA documentation varies by product; request the documents needed for your exact data center specification.
Can you supply custom ductwork for hot aisle / cold aisle containment?▾
Yes. Hot aisle and cold aisle containment is one of our specialty applications. We fabricate custom duct runs, blanking panels, ceiling return plenums, and air seal systems to match your containment layout. Our engineering team works from your CAD drawings or rack layout specifications to produce precisely fitted components. Typical lead time is 3-4 weeks for custom containment ductwork.
What is the minimum order for data center HVAC projects?▾
For standard catalog products (grilles, dampers, spiral duct), our minimum order is one pallet or $2,000 — suitable for single-room or edge data center installations. For custom fabrication projects, there is no minimum order value — we quote on a per-project basis. Most data center projects range from $10,000 to $500,000 depending on facility size and scope.
How do you handle logistics for data center construction timelines?▾
For current orders, confirm stock and production lead times with our team. China-made components can ship by sea or air. Houston production of galvanized ducts, spiral ducts and custom elbows is expected to be ready by December 2026; US fabrication lead times will be confirmed after startup.
Do you supply liquid cooling piping and hoses for AI data centers?▾
Yes. We supply flexible stainless steel cooling hoses (316/321 grade, ½" to 4"), quick-disconnect connectors, expansion joints, and copper chilled water piping for liquid cooling systems. These components connect cooling distribution units (CDUs) to server racks in direct-to-chip and rear-door heat exchanger configurations. As AI data center rack densities reach 50-100 kW, liquid cooling piping is becoming the fastest-growing segment of data center infrastructure — growing at 25-33% annually.
What piping materials are best for data center liquid cooling?▾
The choice depends on the application. Stainless steel (316L) is preferred for CDU-to-rack flexible hoses and manifolds due to corrosion resistance and pressure performance. Copper (ACR grade) is standard for chilled water distribution and CRAH/CRAC connections because of its heat transfer properties. HDPE is gaining adoption for large-diameter facility cooling loops because it eliminates corrosion and offers fused, leak-free joints. We supply components in all three materials and can advise on the right fit for your cooling architecture.
Building or Expanding a Data Center?
Get a custom HVAC component quote for your data center project. Engineering consultation and 3D layout review. Houston duct production is planned for December 2026; request current sourcing details.